Scania 1368682 Torque Rod Bush — IATF 16949 Manufacturer

If you’re sourcing the Scania 1368682 torque rod bush, you’ve likely already settled the “what” — your real question is who can supply it consistently, to drawing, and at a fair price in volume. As a Chinese rubber anti-vibration component manufacturer certified to IATF 16949, ISO 9001, ISO 14001, ISO 45001 and AEO, we produce this part number in-house — we are not a trading middleman. This page answers what aftermarket buyers and fleet technical purchasers actually care about: part-number confirmation, vehicle fitment, specifications, quality control, MOQ and lead time.

What Is the Scania 1368682 Torque Rod Bush?

A torque rod bush — also called a reaction rod bushing, balance rod bush or silent block — is a key rubber-to-metal bonded component in the rear suspension of heavy trucks. It sits at the ends of the reaction (torque) rod and acts as a flexible pivot for the axle. Under acceleration, braking and heavy-load climbs, the axle takes huge torsional and shock loads; the bush absorbs vibration and impact through the elastic deformation of its rubber while controlling longitudinal axle movement, keeping the truck stable and the ride composed.

Once the rubber ages, cracks, or de-bonds from the steel, you get knocking noises, axle misalignment and uneven tyre wear — and in serious cases, a safety risk. For fleets it’s a high-frequency wear item that demands tight consistency from batch to batch. And consistency is exactly where a manufacturer differs from a trader.

Cross-References & Interchange Numbers

Buyers often hold different numbers for the same bush — that’s normal. The confirmed interchange numbers for 1368682 are:

• 1368682 (Scania OEM)

• 273621

• 349254

• 040.018

If your bush carries any of these, it is the same specification as 1368682 and is directly interchangeable — no need to re-develop or double-source.

How to Verify Before You Order

Cross-referencing is step one. Before a volume order we recommend you: ① measure the inner diameter, outer diameter and overall length with calipers and compare to the table below; ② send us a clear photo of both ends of the actual part; ③ tell us your Scania series and year. Our engineering team will run a second confirmation so you don’t receive a “right number, slightly wrong size” part.

Vehicle Compatibility (Scania 2 / 3 / 4 Series)

This bush primarily fits the rear-suspension reaction rod system of Scania 2-, 3- and 4-series trucks (including common models such as the 142 / 143). Because suspension layouts can vary across chassis and model years, series-level fitment is a starting reference only — always confirm against your vehicle’s actual part number and measured dimensions. Send us your model and chassis number and we’ll confirm an exact match.

Technical Specifications

Note: dimensions are common reference values; actual tolerances follow our production drawing. 2D drawings and samples are available for confirmation on request.

How We Build It: Materials & Quality Control

We don’t re-badge ready-made stock. This part number is produced end-to-end in our own factory:

• Compound control — the rubber formula is engineered for fatigue resistance, high/low-temperature stability and dynamic load, so it won’t crack or de-bond under sustained full-load duty.

• Bonded vulcanisation — rubber and the steel skeleton are joined by adhesion vulcanisation, with bond strength verified by peel testing, eliminating the most common failure mode at the source: rubber-to-metal separation.

• Process control — run under an IATF 16949 system with full inspection of critical dimensions plus sampling, and traceable retained samples per batch.

• Durability data — dynamic stiffness and fatigue-life test data can be provided to support your matching and approval process.

That’s the real meaning of IATF 16949 / ISO 9001 certification — not a certificate on a wall, but a system that makes “every batch identical to the last” a process, not a promise.

Why Buy Direct from the Manufacturer (Not a Trader)

Price — no middleman mark-up; a more transparent cost structure at the same quality.

Consistency — next month’s re-order comes off the same mould, the same compound, the same line.

Technical response — matching, spec changes, drawings and testing go straight to our engineers, with nothing lost in relay.

Compliant export — as an AEO-certified company, our customs clearance, certificates of origin and export documentation run smoothly and predictably.

Ordering: MOQ, Lead Time, Packaging & Logistics

• MOQ — small trial orders welcome; quantity negotiable per part number.

• Lead time — common numbers are kept in stock for fast dispatch; custom or large volumes run ~25–35 days, with peak-season notice given in advance.

• Packaging — neutral packaging, your-brand (OEM) packaging and custom colour boxes, ready for aftermarket shelves.

• Logistics — FOB / CIF / DDP terms; sea, air or courier. Our AEO status keeps documentation hassle-free end to end.

Installation & Service Tips

• Clean the rod eye before pressing; check it’s free of rust and burrs to avoid scoring the rubber edge.

• Press in with a proper tool applying even force — never hammer the bush directly, or you’ll skew the rubber or deform the sleeve.

• Use a neutral lubricant (soapy water is fine) during pressing; never use mineral-oil-based grease, which attacks rubber.

• After fitting, check both ends are symmetrically located and torque to the value in the Scania service manual.

• Replace in pairs — fit both ends of the same rod together to avoid uneven wear from mismatched stiffness.

FAQ

Q: Are 1368682, 273621 and 349254 the same bush?

A: Yes — they are confirmed interchange numbers, identical in specification and directly interchangeable.

Q: Are you a factory or a trader?

A: We are the manufacturer — our own factory and tooling, certified to IATF 16949, ISO 9001, ISO 14001, ISO 45001 and AEO.

Q: Can you do our own brand packaging?

A: Yes — neutral packaging and OEM-branded colour boxes are available, ready for aftermarket resale.

Q: Can we get a sample first?

A: Yes — we provide samples and can include a 2D drawing so you can match before placing a volume order.

Q: What’s the MOQ and lead time?

A: Small trial orders are welcome; stocked items ship fast, custom/large volumes run ~25–35 days.

Request a Quote for Scania 1368682

If you’re looking for a stable, compliant, engineer-backed Chinese manufacturer for the Scania 1368682 torque rod bush, we’re ready to confirm the match and quote.

�� Send your part number / vehicle series / quantity to our WhatsApp, or fill in the inquiry form below — our technical team replies within 24 hours with spec confirmation, a quotation and lead time.