Views: 0 Author: Site Editor Publish Time: 07-02-2026 Origin: Site
On any DAF heavy truck, the rubber bush at the parabolic leaf-spring eye is a small part that carries a big job. This DAF truck rubber bush (OEM 1779767) isolates road shock between the spring and chassis bracket, protecting the frame, driver comfort and fleet uptime. When a leaf-spring bushing wears out, handling suffers and repair costs climb — which is exactly why fleet operators, OEM buyers and repair shops across Europe and North America keep this reference in stock.
The DAF parabolic spring bush 1779767 is a vulcanized rubber-to-metal component. A high-strength natural-rubber (NR) body is bonded to an inner steel sleeve and, in the four-hole mounting design, seated in a rigid bracket that carries the leaf-spring eye. This construction lets the bush flex under load while keeping the spring located precisely on the chassis.
For accurate sourcing, the 1779767 bush cross-references to the following DAF OE and aftermarket part numbers:
Brand |
Reference No. |
DAF (OE) |
1779767 / 1699564 |
Febi Bilstein |
35024 |
SAMPA |
050.162 |
DT Spare Parts |
5.10180 |
AUGER |
55192 |
Corteco |
80001158 |
PE Automotive |
104.036-00A |
Stellox |
84-43316-SX |
ADR |
54509051 |
SEM LASTIK |
10201 |
Performance advantages: superior fatigue life under repeated compression, wide operating-temperature stability, resistance to oil mist, ozone and road salt, and consistent damping that reduces NVH transmitted into the cab. Every batch is produced under IATF 16949 quality control with dimensional and hardness checks.
OEM 1779767 fits a broad range of DAF commercial vehicles. Confirm by OE number before ordering:
DAF Series |
Model Range |
Production Years |
75 |
FA/FT 75.240 – 75.300 |
1992 – 1998 |
75 CF |
75 CF 250 – 320 |
1998 – 2001 |
85 |
FA/FT 85.330 – 85.400 |
1992 – 1998 |
85 CF |
85 CF 340 – 430 |
1998 – 2000 |
95 |
95.310 – 95.500 |
1987 – 1998 |
95 XF |
95 XF 380 – 530 |
1997 – 2002 |
CF 75 / CF 85 |
75.250 – 85.510 |
2001 – 2013 |
CF (Euro 6) |
CF FA/FT 290 – 440 |
2013 – present |
● Clunking or knocking noise from the rear axle over bumps
● Visible cracking, bulging or perishing of the rubber
● Excessive leaf-spring movement and vague, wandering steering
● Uneven tyre wear and misaligned axle tracking
● Metallic contact / rust marks where rubber has separated from the sleeve
● Always replace bushes in axle pairs (left + right) for balanced handling
● Support the axle and de-tension the spring before removal
● Use a proper press; do not hammer the bush into the eye
● Lubricate with rubber-safe assembly fluid only — never petroleum grease
● Torque all bracket fasteners to DAF specification and re-check after first run
Parameter |
Specification |
OEM Number |
1779767 / 1699564 |
Type |
Parabolic leaf-spring bush (4-hole mount) |
Length |
≈ 220 mm |
Height / Thickness |
≈ 205 mm |
Width |
≈ 135 mm |
Rubber hardness |
60 ± 5 Shore A (customizable 55–75) |
Rubber material |
Natural rubber (NR), steel-reinforced |
Skeleton / sleeve |
Q235 / 45# steel, phosphated |
Bonding |
Hot-vulcanized rubber-to-metal |
Operating temp. |
-40 °C to +100 °C |
Certification |
IATF 16949 |
● OE-equivalent fit — direct replacement for DAF 1779767 / Febi 35024, no modification
● IATF 16949 factory with full dimensional & hardness traceability
● Long fatigue life — engineered NR compound resists ozone, oil and road salt
● Customizable hardness (55–75 Shore A) for OEM and heavy-duty applications
● Factory-direct pricing, stable lead times and MOQ flexibility for wholesalers
Q: Is 1779767 interchangeable with Febi 35024?
A: Yes. Our bush is fully cross-referenced to Febi Bilstein 35024 and DAF OE 1699564, with identical mounting geometry and a 4-hole bracket design.
Q: Which DAF models does it fit?
A: DAF 75, 85, 95, 95 XF and the CF series (including Euro 6 CF). Always verify against OE number 1779767 or 1699564.
Q: What rubber hardness do you offer?
A: Standard is 60 ± 5 Shore A. We can tune the compound from 55 to 75 Shore A for softer NVH or heavier axle loads.
Q: Can you supply OEM / private-label packaging?
A: Yes. We support neutral packaging, buyer logo and custom part-number labeling for distributors and brand owners.
Q: What is the minimum order quantity?
A: MOQ is flexible. Trial orders and mixed-reference sample orders are welcome for qualification.
Q: How do you guarantee quality?
A: Production runs under IATF 16949 with incoming-material, dimensional, bonding pull-off and hardness inspection on every batch.
Q: Do you provide samples before bulk orders?
A: Yes — paid or conditional free samples are available so you can validate fit and durability first.
Q: What are the lead times and shipping options?
A: Typical lead time is 15–30 days depending on quantity. We ship by sea, air or express with full export documentation.
Need DAF rubber bush 1779767 in volume? Hebei Huami manufactures OE-equivalent leaf-spring bushings for European and North American fleets, OEMs and aftermarket distributors. Contact us today for a factory quotation, technical drawings or a sample — and lock in reliable, IATF 16949–certified supply for your program.
