A global supplier of specialty rubber seals and shock absorbers.
Strong manufacturing and R&D capabilities.
More than 30 years of R&D and manufacturing experience.
Views: 0 Author: Site Editor Publish Time: 06-22-2026 Origin: Site
The engine mount is one of the most safety-critical rubber-to-metal components in any Mercedes-Benz heavy truck. The Mercedes-Benz engine mount 6202400517 (A6202400517) secures the powertrain to the chassis of Actros and related Mercedes-Benz commercial vehicles, isolating engine vibration, absorbing torque shock, and protecting the frame, cab, and driveline from premature fatigue. A worn or collapsed engine mounting transmits harsh vibration into the cab, accelerates wear on surrounding components, and can cause dangerous engine movement under load. For European, North American, and CIS aftermarket buyers and small-to-medium OEMs, a correctly engineered replacement for OE number 6202400517 is essential to keeping fleets running and downtime low.
The 6202400517 engine mount is a bonded rubber-metal assembly purpose-built for the high-load, high-vibration environment of Mercedes-Benz commercial vehicle engines. Its design balances three competing demands: vibration isolation, load-bearing strength, and long service life under continuous duty.
• Bonded rubber-to-metal design: a vulcanized natural/synthetic rubber element chemically bonded to steel mounting plates and sleeves for maximum durability.
• Stamped or forged steel brackets with precisely positioned mounting holes that match the OE bolt pattern of the 6202400517 application for direct, no-modification installation.
• Internal rubber profile tuned to the engine's natural frequency to dampen torsional and vertical vibration across the full rev range.
• Optional internal travel limiters / stoppers to control excessive engine movement during hard acceleration, braking, and off-road operation.
• High-grade rubber compound engineered for fatigue resistance, heat resistance, and stable damping characteristics from low to high operating temperatures.
• Oil-, ozone-, and aging-resistant elastomer to withstand the under-hood environment of diesel truck engines.
• Strong rubber-to-metal bond strength to resist delamination under repeated torque reversal.
• Tested for static and dynamic stiffness consistency to match OE ride and NVH (noise, vibration, harshness) behavior.
Always verify the exact application by OE number and bracket geometry before ordering. The 6202400517 engine mount is commonly cross-referenced with the following Mercedes-Benz and aftermarket numbers:
Reference Type | Number(s) |
Primary OE Number | 6202400517 / A6202400517 |
Mercedes-Benz Cross OE | 6202400317 (A6202400317), 6202400417 (A6202400417) |
Related OE Family | 6582410013, 6582410113, 6582410213, 6582400213 |
OE (spaced format) | 620 240 05 17 / 658 241 00 13 / 658 240 02 13 |
Aftermarket Cross | Sabo SA 658 241 0013, 100.364 (and equivalents) |
Typical Application | Mercedes-Benz Actros and related European heavy trucks |
Note: Cross-reference numbers are provided for identification only. Final fitment must be confirmed against the vehicle's exact engine, chassis, side designation, and production date.
It is designed for Mercedes-Benz Actros and related Mercedes-Benz heavy-duty trucks. Because engine mountings vary by engine type, chassis, and left/right position, always confirm fitment against the vehicle's OE number and bracket geometry before ordering.
These are closely related Mercedes-Benz engine mounting numbers within the same family, often differing in bracket orientation, stiffness, or mounting position. They are frequently listed as cross-references, but you should match the exact OE number stamped on your original part.
Common symptoms include increased cab and steering-wheel vibration, clunking or knocking during gear changes, visible cracks or separation in the rubber, oil contamination, sagging engine position, and excessive engine movement under acceleration or braking.
Our engine mounts are manufactured to OE specifications using bonded rubber-to-metal construction, controlled rubber compounds, and verified bolt-pattern geometry to deliver OE-equivalent fitment, damping, and service life.
We use high-grade, fatigue-resistant elastomers selected for heat, ozone, and oil resistance, ensuring stable damping and long service life in the demanding under-hood environment of diesel trucks.
Yes. We manufacture a full range of engine mountings and rubber-metal components for Mercedes-Benz, MAN, Volvo, Scania, DAF, Renault, and Iveco trucks. Send us your OE numbers and we will match them.
Yes. We support OEM/ODM production, custom compounds, custom branding, and private-label packaging for distributors and OEM customers. MOQ and lead time depend on the specification.
We offer neutral or custom packaging, flexible MOQs for aftermarket buyers, and reliable export logistics with FOB/CIF terms. Contact us for a formal quotation tailored to your order volume.
Looking for a reliable supplier of Mercedes-Benz engine mount 6202400517 and other commercial-vehicle rubber components? As an IATF 16949, ISO 9001, ISO 14001, and AEO-certified manufacturer, we deliver OE-quality engine mountings with verified cross-references, competitive factory pricing, and dependable export service.
Contact our international sales team today to request a free sample, a detailed quotation, or our full OE cross-reference catalog. Send us your OE numbers and required quantities — we will respond promptly with the right solution for your fleet or distribution business.
