2026-09-29 1. IntroductionOn high-speed trains, metros and regional EMUs, the exterior ventilation system faces constant airflow pulsation, car-body vibration and temperature cycling, along with rain, snow, oil mist and UV. The flexible connectors and compensators that link fans, air ducts and the car body are
Read More
2026-09-26 Volvo 1075255 is the rubber-to-metal V-stay (reaction rod) bush fitted at the axle end of Volvo FH12, FH16, FM7, FM12 and NH12 air-suspension trucks. It locates the axle, controls axle movement and filters vibration. This guide covers structure, specs, cross-references, failure signs, installation and FAQs, supplied by Hebei Tongsource, a subsidiary of Huami (BSE: 920247).
Read More
2026-09-21 The Volvo rubber buffer 1580214 is a rear axle suspension bump stop that limits axle travel and cushions impact loads on Volvo F, N, FL, FM, FMX and FH trucks and on Renault Trucks T, C and K. This guide covers structure, materials, fitment by series and year, 20+ cross-reference numbers (Febi 11879, DT 2.61050, SAMPA 030.081 and more), failure symptoms, installation notes, specifications and an FAQ. Supplied by Hebei Tongsource International Trade, the export arm of Huami (BSE: 920247).
Read More
2026-09-15 A technical guide to DAF anti-roll bar bush 0558864. Covers a three-step fitment check, how the bush controls body roll, the natural-rubber compound and the 65 vs 70 Shore A decision, 57x85x61 mm geometry and interference design, an 18-model fitment list from the F series to the 2021 XF, 27 brand cross-references including febi 19313 and DT 5.13116, eight failure symptoms, a full specification table, nine installation notes with torque values, and eleven sourcing FAQs.
Read More
2026-09-14 Volvo leaf spring rubber mounting 20390836 is the hollow rubber spring located between the rear leaf/parabolic spring and the frame bracket on Volvo FH, FM, FMX, FL, FE, NH12 and Renault Premium, Kerax and C/D/K trucks. This article explains its structure, NR/SBR compound and rubber-to-metal bonding, lists exact vehicle fitment by model and year, gives a full cross-reference table (Febi 03528, Sampa 030.076, Lemforder 25563 01, SKF VKDCV 01044 and more), typical failure symptoms, key specifications, installation notes and FAQs for fleet and wholesale buyers.
Read More
2026-09-12 1. IntroductionIn a heavy truck's front suspension, the stabilizer bar bushing is the rubber component that determines body-roll control and handling stability. The Scania stabilizer bar bushing (OEM 213604) sits between the front anti-roll bar and its frame brackets, fits both left and right sides,
Read More
2026-08-18 1. The Role of the DAF Truck Cab Support Bushing in the Cab Suspension System In commercial vehicle cab suspension systems, a cab support bushing (Cab Support Bushing / Cab Mount) is not a “simple rubber part.” It carries both structural-connection and comfort-control functions—especially critical u
Read More
2026-08-14 HINO Truck Engine Mount (Rubber-Metal) OEM: 12371-E0150Selection, Structure & Replacement Guide (B2B)Keyword placement (natural): HINO truck engine mount, 12371-E0150, HINO engine mount replacement, truck engine mount supplierFitment: HINO Trucks (exact model years and mounting position subject to v
Read More
2026-08-12 This guide covers the Mercedes truck propshaft center bearing OEM 3854100222: three-in-one vulcanized construction (steel bracket, NR rubber cushion 60±5 Shore A, sealed 2RS bearing), full fitment list from Actros and Atego to Unimog, cross references to febi 03393, LEMFORDER 25554 01, MEYLE and SAMPA, typical failure symptoms, key specifications and installation torque tips. Supplied factory-direct by Hebei Tongsource, the export subsidiary of BSE-listed Hebei Huami, under IATF 16949 with free samples and 24-hour quotations.
Read More
2026-08-06 A technical buyer guide to Mercedes-Benz cab suspension bushing 9603170312 (A9603170312 / 960 317 03 12). It covers the role of the bush in the four-point cab mounting system, the rubber-to-metal vulcanised structure, material and stiffness design, vehicle fitment for Actros MP4/MP5, Antos, Arocs and Atego, cross references to DT, SAMPA and AUGER, failure symptoms, a full specification table, torque and fitting notes, plus eight sourcing FAQs.
Read More